AI Recruitment Agent

Screen thousands of candidates, delivering ranked shortlists in minutes.

Efficient hiring

Shortlist candidates more efficiently — reduce manual screening & time-to-hire by 90%.

Lower cost

Cut cost-per-hire significantly by automating the repetitive parts of recruitment.

2M+ job seekers

Screen from candidates you source or tap directly into our job-ready pool.

AI HR Agent

Faster answers to HR questions, fewer support tickets, more compliance.

Deflect 95% of HR tickets

AI provides instant answers to employee questions

Focus your time

Spend less on admin, more on strategic initiatives that actually move your business forward.

Stay compliant automatically

Real-time policy and contract updates are applied automatically.

AI Payroll Agent

Hero AI processes payroll in seconds, identifying anomalies for you to approve.

Automated calculations

Complex award interpretations and leave accruals computed instantly and accurately.

Anomaly detection

AI flags unusual patterns like overtime spikes before they reach the pay run.

NPP settlement

Same-day payments via New Payments Platform infrastructure — no delays.

HR, Payroll, Benefits, Hiring + Talent built-in.

Request a demo
A furry hand holding a phone showing Cami Walker, a 95% candidate match

Plumbing and Fire Sprinklers Award Summary [MA000036]

Published

Plumbing and Fire Sprinklers Award Summary [MA000036]

Managing a trade business comes with plenty of moving parts, and staying across award compliance is no exception. Whether your team handles domestic plumbing, commercial gasfitting, roof drainage, or specialized fire sprinkler installation, the Plumbing and Fire Sprinklers Award 2020 sets the benchmark for your day-to-day operations.

Coverage

The Plumbing and Fire Sprinklers Award 2020 (‘Plumbing Award’) is both an industry and occupational award, meaning it covers employers and employees who are in the industry of being a plumbing and/or fire sprinkler fitting contractor and employers in other industries who employ plumbers or fire sprinkler fitters.

For this purpose “plumbing” means:

plumbing, gasfitting, roof plumbing, lead burning, ship plumbing, heating, airconditioning or ventilation plumbing, irrigation installation, pipe-fitting or domestic engineering work, whether using prefabricated material or not.

Work can be done on-site (eg. repairs or installations at an established property) or on a construction site.

It also covers any work done in connection with:

  • sheet lead, galvanised iron, other types of sheet metal or any other materials usually fixed by plumbers,
  • lead, wrought, cast or sheet iron, copper, brass or other classes of pipework,
  • water (hot and cold), steam, gas, air, vacuum, heating or ventilation applications, fittings, services or installations
  • house, ship, sanitary, chemical or general plumbing or draining and irrigation.

“Fire sprinkler fitting services” means the erection, fitting, fixing, altering, inspecting, testing, maintaining, retrofitting, overhauling or repairing of apparatus, pipes and/or fittings in and/or outside of buildings, ships or other structures for the extinguishment of fire by automatic sprinklers and/or other fire protection systems.

The Plumbing Award applies to employers who provide labour on an on-hire basis in the plumbing and fire sprinkler fitting industries.

The Plumbing Award does not cover employers bound by another modern industry award that contains plumbing and fire sprinkler fitting classifications (clause 4.3). Employees covered by a modern enterprise award or an enterprise instrument are also excluded (clause 4.7).

It is also important to check other industry awards that may be more suitable for the work being performed, such as the Building and Construction General Onsite Award.

Types of Employment

Employees under the Plumbing Award must be employed in one of the following categories and at the time of engagement an employer must inform each employee in writing of the terms of their engagement, including which category they are engaged in:

  • daily hire employees (plumbing and mechanical services classifications only);
  • weekly hire employees;
  • casual employees.

Daily hire employees (plumbing and mechanical services classifications only)

Only plumbing and mechanical services employees may be employed as daily hire employees. This excludes employees under the fire sprinkler fitting stream. Apprentices must not be employed as daily hire employees.

The following provisions apply to daily hire employees:

  • When terminating employment, one day’s notice is required from either party (or one day’s pay must be paid or forfeited) – however, an employer may dismiss an employee without notice for misconduct or refusing duty;
  • Notice given at or before the usual starting time of any ordinary working day will expire at the completion of that day’s work;
  • A tradesperson will be allowed one hour prior to termination to gather, clean, sharpen, pack, and transport tools.

Weekly hire employees

Weekly hire employment is subject to the usual notice provisions set out in the National Employment Standards (NES) and in clause 33 of the Plumbing Award.

A full-time weekly hire employee works an average of 38 ordinary hours per week.

Part-time weekly employees work an average of less than 38 ordinary hours per week on a reasonably predictable basis.

Payment for each ordinary hour worked must be no less than 1/38th of the minimum weekly rate of a full-time employee for their relevant classification.

Part-time employees receive pro rata entitlements according to their ordinary hours.

Before commencing part-time employment the employee and the employer must agree in writing (future variations allowed if agreed in writing):

  • that the employee will work part-time;
  • the hours to be worked, the days that will be worked, and starting and finishing times each day;
  • the classification applying to the work to be performed;
  • the period of part-time employment (eg ongoing or for a fixed period, etc).

A copy of the agreement and any variation must be given to the employee.

Casual employees

A casual employee must work less than an average of 38 ordinary hours or less than 5 days per week over any 2 successive weeks.

In addition to the hourly minimum rate for a weekly hire employee appropriate for the type of work, a casual employee must be paid an additional 25% loading with a minimum payment of 3 hours per engagement.

Casual conversion laws changed significantly under the Closing Loopholes legislation. The pathway to permanency is now an “employee choice” framework. An eligible casual employee who believes they no longer meet the definition of a casual employee can notify their employer in writing that they want to move to full-time or part-time employment, after 6 months’ service (or 12 months for a small business employer). The employer must respond in writing within 21 days. The employer can only refuse on limited grounds: the employee still meets the casual definition; there are fair and reasonable operational grounds; or accepting the notice would breach a legally required recruitment or selection process. Disputes can be referred to the Fair Work Commission.

Right to Disconnect

As a formal workplace right under the Fair Work Act (fully in effect for all employers as of 26 August 2025), employees may refuse to monitor, read, or respond to contact or attempted contact from their employer or a third party outside of their working hours, unless their refusal is unreasonable. If a dispute about out-of-hours contact cannot be resolved at the workplace level, either the employer or employee can apply to the Fair Work Commission for orders.

Apprentices

The Plumbing Award contains special rules for apprentices including:

Travel expenses during block release training—sprinkler fitters

In respect of sprinkler fitting apprenticeships, where an apprentice cannot reasonably be expected to travel to and from their residence each day, during the period of block release training, return travel between their usual place of residence and the city where the course is conducted must be arranged by the employer at no cost to the apprentice.

The employer must also arrange suitable accommodation to be available at no cost to the apprentice.

Period of apprenticeship

Apprentices will be contracted on a full-time basis for a term of 4 years. This will consist of off-the-job and on-the-job training.

Cancellation or suspension of training agreement

A training agreement may be suspended or cancelled by the mutual consent of both parties (i.e. apprentice & employer) or where there are financial difficulties or a lack of orders and the employer is unable to find suitable employment for the apprentice or a transfer to another employer cannot be arranged.

A trainee apprenticeship may be terminated by either party giving:

(i) 2 weeks’ notice of termination; or

(ii) notice of termination in accordance with the NES;

whichever is the greater (see further details on notice periods under the NES later in this guide).

Transfer of training agreement

An apprentice may, with the consent of the parties to the training agreement, transfer their training agreement to another employer.

If the apprentice engages with a number of different employers during their term, all terms will be regarded as:

  • one continuous term; and
  • the most recent employer will accept the apprentice at the position the apprentice occupied under their training agreement at the last date they were employer with their immediate former employer.

Hours

The ordinary hours of employment of apprentices must not exceed 38 hours per week.

Overtime and shiftwork

Apprentices under the age of 18 years old must not be required to work overtime or shiftwork unless they choose to do so.

No apprentice will, except in an emergency, work or be required to work overtime or shiftwork at times which would prevent their attendance at a Registered Training Organisation.

Payment by results

An apprentice must not work under any system of payment by results.

Lost time

Subject to any relevant State or Territory law, if an apprentice is absent from work for any day without the consent of the employer, they will need to work an equivalent number of days at the end of the year of their apprenticeship if required to do so by the employer. The calendar period of the next succeeding year of their apprenticeship will not begin until the additional day(s) have been worked.

The extra time needed to be worked by the apprentice will be reduced by any hours worked in that year in excess of their ordinary hours (e.g. overtime work).

Please note: if the apprentice is based in Queensland, they may have different entitlements – please contact us for further advice.

Attendance at a Registered Training Organisation

Apprentices will be released by the employer to attend a Registered Training Organisation during ordinary working hours of work for the purposes of undertaking the off-the-job component of the apprenticeship training, without loss of pay.

The time spent by an apprentice (other than an apprentice undertaking a school-based apprenticeship) in attending any training and assessment is to be regarded as time spent working for the employer for the purposes of calculating the apprentice’s wages and determining the apprentice’s employment conditions.

Training fees and textbooks

Any costs incurred by an apprentice for fees for prescribed courses and prescribed textbooks (excluding those textbooks which are available in the employer’s technical library) must be reimbursed by the employer within:

  • 6 months of starting the apprenticeship or a stage of the apprenticeship (eg. the start of the second year); or
  • 3 months of starting training with the registered training organisation,

whichever is later.

This is not applicable where there is unsatisfactory progress on the part of the apprentice.

Ordinary hours of work

Subject to alternative arrangements being implemented in accordance with clause 15.4 of the Plumbing Award, or an employee being engaged to work shift work in accordance with clause 23, ordinary hours of work:

  • average 38 ordinary hours per week over a 4-week work cycle;
  • will be worked in a 20-day, 4-week cycle (comprised of 19 days of 8 hours with 0.4 of one hour each day worked accruing to be paid as a rostered day off (RDO) in each cycle);
  • must be worked Monday to Friday inclusive, between 7.00 am and 6.00 pm.

Any hours in excess or outside of these hours will be paid as overtime (see below).

Early starts

The employer and its employees may agree that the working day instead begins at 6.00 am or at any other time between that hour and 8.00 am and the working time will then begin to run from the time so fixed with meal and rest breaks adjusted accordingly.

Alternative methods of arranging ordinary hours

The Plumbing Award allows for alternative methods of how ordinary hours are to be arranged, by agreement between the employer and the majority of its employees (e.g. if they do not wish to operate an RDO system), see clause 15.4 of the Award for further details.

Rostered days off (RDO’s)

Clause 15.5 of the Plumbing Award contains detailed rules about how RDO systems must be operated – please contact us for any further information required.

Overtime

General overtime, weekend and public holiday work

Any overtime worked must be paid as follows (calculated on the minimum hourly rates set by the Plumbing Award):

DayFull-time and part-time employees% ordinary hourly rateCasual employees% ordinary hourly rate
Monday to Friday—all employeesFirst 2 hours150175
After 2 hours200225
Saturday—sprinkler fitters200225
Saturday—plumbing and mechanical services employees, irrigation installer employeesFirst 2 hours150175
After 2 hours200225
After 12 noon200225
Sunday—all employees200225
Public holidays—all employees250275
Work commenced after midnight and before start of ordinary hours200225

Employees required to work on weekends are guaranteed a certain number of hours. Those who work on Saturdays must be given at least 3 hours, while those working on Sundays or public holidays must receive at least 4 hours of work. However, this guarantee does not apply if they are recalled to work in accordance with the call-back rules outlined below.

In addition to the above, employees are also entitled to paid rest breaks and meal breaks when working overtime in accordance with the rules set out below. Overtime worked on a Saturday, Sunday or public holiday also includes a paid 10-minute rest period (clause 22.1(f)).

If an employee completes hours immediately before or after a part-day public holiday as part of one continuous shift, those hours count towards the minimum engagement period set out above.

Call-backs

If an employee is called back to work after they have left their employer’s premises, they must be paid a minimum of:

  • 3 hours if they are a plumbing or mechanical services employee; or
  • 4 hours if they are a sprinkler fitter employee.

If the job can be completed quicker than the minimum periods set out above, the employees cannot be required to work the full minimum periods, except in the case of unforeseen circumstances.

The rules about minimum payment periods do not apply in cases where:

  • It is customary for an employee to return to their employer’s premises to perform a specific job outside their regular working hours; and
  • Such work is to be completed straight after the employee has worked their ordinary hours OR the nature of such work is service work.

Transport after overtime or holiday work

If an employee finishes work after having worked overtime that has not been regularly rostered on OR is on a public holiday, and at the completion of such overtime, there is no reasonable transport for them to get home, the employer is required to:

  • Pay the cost of conveyance to the employee’s home or to the nearest public transport, or
  • Provide a conveyance to the employee’s home or to the nearest public transport.

Time off instead of payment for overtime (TOIL)

An employee and employer can agree to take time off instead of getting paid overtime. An employer cannot simply choose to provide TOIL without agreement.

The agreement must be in writing and must specify the following:

  • Both parties agree that the employee will take time off instead of being paid overtime;
  • The number of overtime hours the agreement applies to, and when those overtime hours were worked;
  • At any time, the employee can request that the employer pay them for the overtime worked at the applicable overtime rate; and
  • Any payment requested must be made in the next pay period.

A separate agreement must be entered into for each period of overtime worked that is to be taken as TOIL.

The employer must keep a copy of this agreement.

The ratio between the amount of time that can be taken off and the amount of overtime worked is 1 to 1.

At any time within 6 months after the overtime is worked, an employer and employee can agree on when the time off is to be taken. If time off is not taken within this period, the employer is required to pay out the overtime in the next pay period following the expiry of the 6 month period.

In the event of employment termination, if time off pursuant to the agreement has not yet been taken, the employer is required to pay the employee for the overtime worked at the applicable overtime rate.

Overtime rest breaks

When employees are required to work overtime for 2 hours or more after their usual finishing time (i.e. end of their ordinary hours), they are entitled to a paid rest break of 20 minutes immediately after their usual finishing time.

Additionally, after every 4 hours of continuous work beyond their usual finishing time, the employee is entitled to a paid rest break of 30 minutes.

There are different rules where employees have been given rest breaks after performing hot or cold work (see clauses 21.6(k) and 21.6(f)).

If an employee continues working for 2 or more hours after their usual finishing time without taking the paid rest break of 20 minutes, they will be considered to have worked an additional 20 minutes and must be paid accordingly.

Overtime meal breaks

When an employee works on a Saturday, Sunday, or a public holiday, they are entitled to a paid meal break of 20 minutes after completing 4 hours of work. This meal break is paid at the applicable overtime rate.

If an employee takes a 30 minute meal break they will not get paid for the additional 10 minutes break.

If the employee is required to work for more than an additional 4 hours beyond the initial meal break, they are allowed to take a paid rest break of 30 minutes to be paid at the applicable overtime rate.

Penalty rates

The Plumbing Award provides for penalty rates to be paid when ordinary hours are arranged so they are worked at unsociable times. A shiftworker is an employee who works ordinary hours during any shift finishing after 6.00 pm and at or before 7.00 am (clause 2).

Shiftwork

The following penalty rates will apply to shiftworkers who are directed by their employer to work ordinary hours between midnight on Sunday and midnight on Friday:

  • Where at least 48 hours’ notice from the employer has been provided and the work is for 5 or more shifts, the employee will be paid at 133% of their ordinary hourly rate for such ordinary hours worked.
  • Where less than 48 hours’ notice from the employer has been provided or the work is for less than 5 shifts, the employee will be paid at 150% of their ordinary hourly rate for the first two hours, and 200% of their ordinary rate thereafter for such ordinary hours worked.

Weekend Work

Where an employee is directed to work ordinary hours between midnight Friday and midnight on Sunday, the employee will be paid:

DayHours% of the ordinary hourly rate
Between midnight on Friday and midnight on SaturdayFirst 2 hours150%
After 2 hours200%
Between midnight on Saturday and midnight on SundayAll hours200%

Public Holidays

Where an employee works ordinary hours on a public holiday (or substitute day or part-day as per clause 29) the employee will be paid at 250% of their ordinary hourly rate for such ordinary hours worked.

Plumbing and mechanical services employees required to work on a public holiday will be given or paid for at least 4 hours work at the appropriate rate. Any hours of work performed immediately before or after a part-day public holiday that form one continuous shift are counted as part of the minimum 4 hours engagement/payment period.

Travel

Where an employee finishes shift work, weekend work or public holiday work at a time when reasonable means of transport are unavailable, the employer will provide the employee with a means of travel to their home, or pay the employee their current wage for the time reasonably spent travelling to their home.

Application of penalty rates

Only one penalty rate will be payable at any given time. Penalty rates are not applicable where overtime is payable.

The usual rules regarding overtime and breaks apply to shift work, weekend work and public holiday work.

Breaks

Unpaid meal breaks

A 30-minute unpaid meal break must be provided between 12 pm and 1 pm. This break does not count as time worked.

The majority of on-site employees on a project can request and agree to lengthen the meal break to a maximum of 45 minutes. Extending the meal break will result in an adjustment to the finish time of work for the day.

Shiftworkers (see further below) are entitled to the unpaid meal break in accordance with clause 16.1 of the Plumbing Award.

If an employee has to work during their meal break to finish work, they must be paid:

  • Double time for plumbing and mechanical services employees, or
  • Time and a half for sprinkler fitter employees.

This rate is paid until the employee gets a meal break.

An employee can also agree to shorten their meal break. In this case, the time the meal break is shortened by:

  • Must be paid, and
  • Is counted as part of the employee’s normal hours

Paid washing time breaks

Employees will be entitled to a 5-minute paid break to be taken immediately before lunch and immediately before finish work to enable them to wash and put away gear.

Employees using toxic substances as defined in clause 21.6(o)(ii) will be entitled to 10 minutes of paid washing time to be taken immediately before lunch and finishing work.

Paid rest break

Employees are entitled to a 10-minute paid rest period to be taken between 9 am and 11 am. This rest period counts as paid work (clause 16.3).

Where an employee is engaged in ‘hot work’ (clause 21.6(k)) or ‘cold work’ (clause 21.6(f)) will be entitled to a 20-minute paid rest after every 2 hours worked, where the hot or cold work continues for more than 2 hours. This break will count as time worked.

Breaks between working days

If an employee works so much overtime between the end of work on one day and the start of work on the next day that they do not have a break of at least 10 consecutive hours the employer must:

(i) release the employee after the end of the overtime until the employee has had at least 10 consecutive hours off; and

(ii) pay the employee for any ordinary working time that falls within the period of absence.

If an employee works on a Saturday, Sunday or public holiday and does not have a break of 10 consecutive hours in the 24 hours preceding their ordinary starting time on their next ordinary day, the employer must:

(i) release the employee after the end of the overtime until the employee has had at least 10 consecutive hours off; and

(ii) pay the employee for any ordinary working time that falls within the period of absence.

If the employer requires an employee who has been released to take their 10-hour break off duty to return to work the employer must:

(i) pay the employee at 200% of the ordinary hourly rate until the employee is released from duty for 10 consecutive hours; and

(ii) once the employee is released from duty, pay the employee for any ordinary working time that falls within the period of absence.

An employee who has worked continuously (except for work breaks allowed by the Plumbing Award) for 20 hours including holiday work must not be required to continue at or recommence work for at least 12 hours.

Service work, on-call, and call back

Service work – Fire sprinkler employees

A fire sprinkler fitter employee required to perform service work outside ordinary working hours for breakdown, accident or other emergency work must be paid at 200% (double time) of the ordinary hourly rate.

The calculation of the period of time in which the employee will be paid for will include only the time reasonably spent in travel or work between the time of the employee’s departure from their normal place of residence and the time of their return thereto provided that:

  • in the case of the first call-back in any one day an employee must be paid for at least a period of 2 hours at 200% of the ordinary hourly rate; and
  • in the case of each subsequent call-back in the same day as for at least a period of one hour whether occurring within 2 hours of the first call back or not.

On-call fire sprinkler employees

Where a fire sprinkler fitter employee is required to be on-call outside the ordinary hours of work they must be readily contactable by telephone at all relevant times and will be entitled to:

  • on-call allowance in accordance with clause 17.2(a) or (b) of the Plumbing Award; and
  • payment for the cost of the employee’s telephone rental.

Call-back and rest periods

When an employee completes service work and is required to work on-call or works because of a call-back, these hours will not count towards overtime where the actual time worked is less than 4 hours on such recall or on each of such recalls.

Use of employee’s work vehicle

When an employee’s vehicle is used for call-out at the request of the employer a per kilometre allowance must be made in accordance with clause 17.4 of the Plumbing Award.

Minimum rates

The minimum rates of pay for each classification level are set out in clause 18 of the Plumbing Award, with summaries in Schedules C, D and E, or in the FWO’s pay guide.

A description of the different classification levels is set out in Schedule A to the Award, which we reproduce at the end of this Guide.

The Award does not provide for reduced rates of pay for junior employees.

Higher duties

An employee appointed for more than half of one day or shift on duties carrying a higher rate than their ordinary classification must be paid the higher rate for such day or shift. If appointed for less than half of one day or shift they must be paid the higher rate for the time at the higher level.

Payment of wages

The Plumbing Award contains the following rules regarding payment of wages:

  • Employees can be paid by cash, cheque, electronic transfer, or a combination of these methods;
  • If an employee is not paid in cash, they should be given reasonable time during work hours to cash their cheque or access their funds;
  • Payments must be made by the end of the workday on Thursday each week;
  • If work finishes early on a pay day because of inclement weather, the employee must still be paid all wages due without undue delay (clause 19.4);
  • If an employee is kept waiting for their wages for more than 15 minutes after work finishes, they must be paid overtime rates for the duration spent waiting;
  • When an employee’s employment is terminated, they must be paid for any complete or incomplete pay periods up to their last day of work and any other amounts they are owed within 7 days after the termination date (subject to rules in the NES which require immediate payment when someone is paid in lieu of notice of termination being provided).

Superannuation

An employer must make superannuation contributions (the Superannuation Guarantee rate is 12% as of 1 July 2025) in compliance with relevant legislation to a superannuation fund for the benefit of an employee. Employees generally have the opportunity to choose their own superannuation fund. If an employee does not choose a superannuation fund, the employer must first check with the ATO for a “stapled” super fund before defaulting to one of the funds listed in clause 20.4 of the Plumbing Award.

From 1 July 2026, Payday Super applies: super must be paid at the same time as wages and must reach the employee’s fund within 7 business days of payday. A 20 business day window applies to a new employee’s first contribution.

An employee may, in writing, authorise their employer to pay on behalf of the employee a specified amount from the post-taxation wages of the employee into the same superannuation fund as the employer makes the superannuation contributions.

Subject to the governing rules of the relevant superannuation fund, the employer must also make superannuation contributions while the employee is on any paid leave and for the period of absence from work (up to 52 weeks) due to work-related injury or work-related illness (provided the employee is receiving workers compensation payments or is receiving regular payments directly from the employer in accordance with the statutory requirements and remains employed by the employer).

Allowances

All-purpose allowances

All-purpose allowances are part of the employee’s regular weekly wage and payable for all-purposes of the award. They must also be included when calculating all payments including:

  • payments for overtime;
  • annual leave and annual leave loading;
  • personal leave;
  • compassionate leave;
  • community service leave;
  • penalty rates; and
  • payments on termination.

A list of the all-purpose allowances that appear in the Plumbing Award (together with the relevant clause in the Award that provides further details is as follows):

  1. Industry allowance (clause 21.3(a));
  2. Plumbing trade allowance (clause 21.3(b));
  3. Registration allowance (clause 21.3(c));
  4. Special fixed allowance (clause 21.3(d));
  5. Fire sprinkler fitting trade allowance (clause 21.3(e));
  6. Industry disability allowance and space, height and dirt money allowance—fire sprinkler fitter employees (clause 21.3(f));
  7. Sprinkler fitters adjustment (clause 21.3(g));
  8. Lost time loading—daily hire employees (clause 21.3(i)); and
  9. Leading hand allowance (clause 21.3(h)(i)).

Wage-related allowances

In addition to the all-purpose allowances, there are a multitude of other allowances detailed in clause 21.4, 21.5 and 21.6, including allowances for:

  • Service work
  • Computing quantities allowance
  • Requirement to act on plumber’s licence
  • Oxy-acetylene welding allowance
  • Electric welding allowance
  • Lead burning allowance
  • Ship work allowance
  • First aid allowance
  • Laser safety officer allowance
  • Multistorey work allowance
  • Service core allowance
  • Acid plants and chemical works allowance
  • Aluminium foil insulation allowance
  • Asbestos eradication allowance
  • Asbestos materials allowance
  • Bitumen work allowance
  • Cold work allowance
  • Cutting tiles allowance
  • Explosive powered tools allowance
  • Hospitals and morgues allowance
  • Hot work allowance
  • Insulation allowance
  • Service shafts allowance
  • Towers allowance
  • Toxic substances allowance

Expense-related allowances

The Plumbing Award also contains various expense-related allowances in clause 21.8, namely:

  • Tool allowance
  • Meal allowance
  • Compensation for tools and clothes
  • Fares allowance
  • Transfer between job sites during work hours—own vehicle
  • Mileage allowance for travel beyond defined radius
  • Living away from home
  • Travelling expenses

From all the allowances set out above, we have summarised those that we most commonly receive queries on below. If you require further information on any of the other allowances please contact us.

Allowance TypeAllowance Amount
Plumbing Trade AllowancePayable to all employees at or above plumbing and mechanical services tradesperson Level 1 and worker Level 2, whether or not they do the higher risk work listed (such as handling insulation, using explosive powered tools, toxic substances or asbestos). The list and amount are in clause 21.3(b).
Registration AllowanceAn employee in a plumbing and mechanical tradesperson classification that is registered in accordance with the relevant State legislation must be paid a registration allowance to compensate for the responsibilities imposed by holding and maintaining registration. See clause 21.3(c) for further information.
Special Fixed AllowanceAll employees, other than apprentices, in the plumbing and mechanical services classifications must be paid a special allowance to compensate for excess travelling time incurred by employees in the building industry and the removal of loadings from various building industry awards. See clause 21.3(d) for further information.
Fire Sprinkler Trade AllowanceThe fire sprinkler fitting trade allowance is a rounded-up allowance based on compensation for a number of the individual allowances covering particular types of work listed in clause 21.3(b).
Leading Hand AllowanceAn employee specifically appointed to be a leading hand must be paid additional amounts above the weekly minimum rate of the highest classification supervised, or their own weekly minimum rate, whichever is the highest, in accordance with the number of employees in their charge. See clause 21.3(h) for further information.
First Aid AllowanceAn employee who is qualified in first aid and is appointed by their employer to carry out first aid duties in addition to their usual duties must be paid an additional allowance per day. See clause 21.4(e) for further information.

Annual leave and annual leave loading

Annual leave is an entitlement provided under the National Employment Standard (NES). Permanent employees are entitled to 4 weeks annual leave.

An employee who works or is required to be on call for any part of 26 weekends or more in a year of employment is entitled to an additional week’s annual leave on the same terms and conditions (clause 24.2).

Payment for annual leave

Employees are entitled to be paid annual leave, including payment for untaken leave upon termination of employment, at their usual rate of pay. Employees that are paid over-award minimum rates are entitled to receive the higher rate on a period of paid leave.

Annual leave loading

In addition to the payment detailed above, an employer must pay a leave loading of 17.5% (clause 24.3), calculated on the rates, loadings and allowances prescribed by clauses 18, 21.2 and 21.9, including applicable fares and travelling time allowances.

Taking annual leave and directing an employee to take annual leave

Generally annual leave should be taken when agreed, the Plumbing Award only allows for employers to direct employees to take annual leave in two limited circumstances as explained below:

  • During a temporary shutdown period in conjunction with the Christmas/New Year period, where the purpose is to give the whole of the annual leave due to all, or the majority, of employees qualified for leave; or
  • When an employee has accrued “excessive annual leave”.

Directing annual leave during shutdown

If an employer intends to shut down all or part of its operations in conjunction with the Christmas/New Year period for the purpose of giving the whole of the annual leave due to all, or the majority, of employees qualified for leave, it must follow this process to direct employees to take annual leave:

  • The employer must give the affected employees two months’ written notice of a temporary shutdown period, or any shorter period agreed between the employer and the majority of relevant employees;
  • An employee engaged after the notice is given, must be provided with written notice of a temporary shutdown period who would be affected, as soon as reasonably practicable;
  • The employer may direct an employee to take accrued paid annual leave during the temporary shutdown period, but the direction must be in writing and reasonable.
  • For any part of the shutdown period not covered by a direction to take accrued paid annual leave, the employer and employee may agree in writing that the employee will take leave without pay. The employee cannot be directed to take leave without pay without their agreement.

Annual Leave in advance

Clause 24.5 of the Plumbing Award allows an employer and employee to agree in writing that an employee can take a period of annual leave before an employee has accrued the entitlement.

The agreement in writing must state the amount of leave that is being taken in advance and when the leave begins.

Both the employer and employee need to sign this, unless the employee is under 18, then a parent or guardian needs to sign on their behalf.

A copy of this agreement needs to be kept for the employee’s record.

If on termination of employment, the employee has not accrued an entitlement to all of a period of paid annual leave already taken in advance, the employer may deduct from any money due to the employee on termination an amount equal to the amount that was paid to the employee in respect of any part of the period of annual leave taken in advance to which an entitlement has not been accrued.

Cashing out annual leave

Cashing out paid annual leave must not be done unless in accordance with clause 24.6 of the Plumbing Award.

Each cashing out of a particular amount of paid annual leave must be the subject of a separate written agreement stating:

  • the amount of leave to be cashed out and the payment to be made to the employee for it;
  • the date on which the payment is to be made.

This must be signed by the employer and employee and, if the employee is under 18 years of age, by the employee’s parent or guardian.

The payment must not be less than what an employee would receive if they took the leave.

An agreement must not result in the employee’s remaining accrued entitlement to paid annual leave being less than 4 weeks.

The maximum amount of accrued paid annual leave that may be cashed out in any period of 12 months is 2 weeks.

The employer must keep a copy of any agreement as an employee record.

Excessive leave accruals: general provision

Under the Plumbing Award an employee is taken to have an “excessive leave accrual” where they have more than 8 weeks paid annual leave accrued (or 10 weeks paid annual leave for a shift worker).

In such a situation the employer or the employee may seek to confer with the other and genuinely try to reach an agreement on how to reduce or eliminate the excessive leave accrual.

Excessive leave accruals: direction by employer that leave be taken (clause 24.8)

If an employer has sought to confer with the employee to form an agreement to reduce an excess leave accrual (and no agreement has been reached), the employer may direct the employee in writing to take one or more periods of paid annual leave in accordance with the following rules

An employer’s direction:

  • is of no effect if it would result at any time in the employee’s remaining accrued entitlement to paid annual leave being less than 6 weeks when any other paid annual leave arrangements are taken into account;
  • must not require the employee to take any period of paid annual leave of less than one week;
  • must not require the employee to take a period of paid annual leave beginning less than 8 weeks, or more than 12 months, after the direction is given;
  • must not be inconsistent with any leave arrangement agreed by the employer and employee;
  • an employee to whom a direction has been given may request to take a period of paid annual leave as if the direction had not been given, likely resulting in this direction ceasing to have any effect.

Excessive leave accruals: request by employee for leave (24.9)

If an employee has sought to confer with the employer to form an agreement to reduce an excess leave accrual (and no agreement has been reached), the employee may give written notice to the employer requesting to take one or more periods of paid annual leave.

An employee may only give a notice to the employer under clause 24.9 if:

  • the employee has had an excessive leave accrual for more than 6 months at the time of giving the notice;
  • the employee has not been given a direction under clause 24.8 that, when any other paid annual leave arrangements are taken into account, would eliminate the employee’s excessive leave accrual.

Notice by an employee must not:

  • result in the employee’s remaining accrued entitlement to paid annual leave being at any time less than 6 weeks when any other paid annual leave arrangements are taken into account;
  • provide for the employee to take any period of paid annual leave of less than one week;
  • provide for the employee to take a period of paid annual leave beginning less than 8 weeks, or more than 12 months after the notice is given;
  • be inconsistent with any leave arrangement agreed upon by the employer and employee;
  • An employee is not entitled to request by a notice more than 4 weeks paid annual leave (or 5 weeks paid annual leave for a shift worker) in any period of 12 months;
  • The employer must grant paid annual leave requested by a notice.

Other leave

Employees are entitled to other leave in accordance with the NES including:

  • 10 days paid personal/carer’s leave per year (not for casuals)
  • 2 days compassionate leave per occasion (unpaid for casuals)
  • 10 days paid family and domestic violence leave (including for casuals)
  • Unpaid parental leave
  • Community service leave
  • Long service leave in accordance with state/territory legislation (which in some states and territories requires payments into a portable long service leave fund, rather than to employees directly)

Public Holidays

Where a public holiday falls on a day on which an employee is usually rostered to work, the employee is entitled to take that day off and be paid at their base rate of pay.

Casual employees are not entitled to absence on public holidays.

An employee cannot be required to work on a public holiday unless:

  • They have first been requested to work on the public holiday by the employer (and that request is reasonable); or
  • It would be unreasonable for the employee to refuse the request to work.

Both the employer and the employee can reach an agreement to substitute another day (or part day) for a public holiday (or part public holiday).

Notice of Termination

The notice periods below apply to both employees and employers providing notice of termination.

These do not apply to casual employees or daily hire employees.

When the employer is the one providing notice of termination, the notice period must be increased by one week if the employee is over 45 years old and has completed at least two years of continuous service.

Period of continuous servicePeriod of Notice
Not more than 1 year1 week
More than 1 year but not more than 3 years2 weeks
More than 3 years but not more than 5 years3 weeks
More than 5 years4 weeks

Deductions from pay for insufficient notice

An employer can deduct up to one week’s wages from an employee’s pay if:

  • The employee is 18 or over;
  • The employee resigns and hasn’t given the full amount of notice required under the Plumbing Award; and
  • The deduction isn’t unreasonable.

However, employers can only deduct pay from wages owed under the award. This does not include other entitlements owed to the employee, such as annual leave.

Job search entitlement

Where an employer has given notice of termination to an employee, the employee must be allowed time off without loss of pay of up to one day for the purpose of seeking other employment.

Industry-specific redundancy scheme

The Plumbing Award includes an industry-specific redundancy scheme, which means the redundancy pay scheme under the Fair Work Act does not apply.

In particular, an employee is entitled to redundancy pay under the Plumbing Award where an employee ceases to be employed by an employer other than for reasons of misconduct or refusal of duty. This therefore even includes a situation where an employee resigns, see further guidance here.

The Plumbing Award also provides for different rates of redundancy pay than in the Fair Work Act, as follows.

Period of continuous service with an employerRedundancy/severance pay
1 year or more but less than 2 years2.4 weeks’ pay plus, for all service in excess of 1 year, 1.75 hours pay per completed week of service up to a maximum of 4.8 weeks’ pay
2 years or more but less than 3 years4.8 weeks’ pay plus, for all service in excess of 2 years, 1.6 hours pay per completed week of service up to a maximum of 7 weeks’ pay
3 years or more than but less than 4 years7 weeks’ pay plus, for all service in excess of 3 years, 0.73 hours pay per completed week of service up to a maximum of 8 weeks’ pay
4 years or more8 weeks’ pay

Provided that an employee employed for less than 12 months will be entitled to a redundancy/severance payment of 1.75 hours per week of service, if and only, if the redundancy is occasioned otherwise than by the employee (i.e. they do not receive this if they resign). There is no exception from paying redundancy pay where the employer has less than 15 employees (unlike under the Fair Work Act).

Employers may make contributions to an approved redundancy pay fund (such as ACIRT). Benefits received from the fund that are attributable to the employer’s contributions may be set off against the employer’s redundancy pay obligation, but the employer remains liable for any shortfall under clause 34.3.

Employee leaving during the redundancy period

An employee whose employment is to be terminated due to redundancy may terminate their employment during the period of notice of termination and if this occurs, will be entitled to the redundancy payment as outlined in the table above until the expiry of the applicable notice period. The employee will not be entitled to their notice being paid out in this circumstance.

Transfer of business

For the purpose of redundancy entitlements:

Where a business is transferred from an employer to another employer and an employee who at the time of such transfer was an employee of the old employer in that business becomes an employee of the new employer:

  • the continuous service of the employment of the employee will be deemed not to have been broken because of the transfer, and
  • the period of employment which the employee has had with the old employer or any prior old employer will be deemed to be service of the employee with the new employer.

Classification levels

A summary of the different classification levels under the Plumbing Award, which in turn dictates minimum rates of pay, is set out below.

A.3 Classification structure definitions

A.3.1 Work levels

(a) Plumbing and mechanical services worker/Sprinkler fitting worker Level 1(a)

New entrant to the industry – no prior experience.

(b) Plumbing and mechanical services worker/Sprinkler fitting worker Level 1(b)

After 3 months in the industry.

(c) Plumbing and mechanical services worker/Sprinkler fitting worker Level 1(c)

After 12 months in the industry.

(d) Plumbing and mechanical services worker/Sprinkler fitting worker/Fire technician Level 1(d)

A Plumbing and mechanical services worker/Sprinkler fitting worker/Fire Technician Level 1(d) is an employee who has fulfilled the substantive requirements of a Plumbing and mechanical services worker/Sprinkler fitting worker Level 1(d) as detailed below. An employee at this level will have:

(i) successfully completed a Services Stream Certificate (Plumbing and mechanical services/Sprinkler fitting) or Property Services (Asset Maintenance), as appropriate, Certificate Level 1 consisting of 16 appropriate modules of structured training; or

(ii) obtained equivalent skills gained through work experience subject to competency testing to the prescribed standard covering the same content as the above modules of training.

An employee at this level performs work above and beyond the skills of an employee at Plumbing and mechanical services worker/Sprinkler fitting worker Level 1(c) and to the level of their training. The following indicative tasks which an employee at this level may perform are:

  • assists in the co-ordination of work in a team environment or works individually under general supervision;
  • is responsible for ensuring the quality of their own work;
  • exercises discretion within their level of skill and training;
  • has an understanding of the construction processes within the services stream;
  • assists in the provision of on-the-job training to a limited degree;
  • works from instructions and procedures;
  • implements basic fault-finding and problem solving skills within the employee’s sphere of work;
  • measures accurately for their area of operation;
  • works in a safe manner;
  • interacts harmoniously with employees of other companies on-site or at the workplace; and
  • adapts to a changing work environment.

The following indicative tasks which an employee at this level may perform are subject to the employee having completed the appropriate training to perform the particular task:

  • erect and dismantle scaffolding;
  • assist with rigging;
  • undertake basic oxy cutting;
  • execute shoring/trenching;
  • undertake site drainage and de-watering;
  • assist one or more tradespersons;
  • safely handle waste; and
  • use tools, plant and equipment requiring the exercise of skill and knowledge beyond that of an employee at Plumbing and mechanical services worker/Sprinkler fitting worker Level 1(c).

The Plumbing and mechanical services worker/Sprinkler fitting worker/Fire Technician Level 1(d) classification incorporates the following translated award classifications:

  • plumber’s labourer;
  • sprinkler fitter’s assistant.

(e) Plumbing and mechanical services worker/Sprinkler fitting worker Level 2

A Plumbing and mechanical services worker/Sprinkler fitting worker Level 2 is an employee who has:

(i) successfully completed a Services Stream Certificate (Plumbing and mechanical services/Sprinkler fitting) Level 2 consisting of 24 appropriate modules of formal structured training; or

(ii) obtained equivalent skills gained through work experience subject to competency testing to the prescribed standards covering the content of the above agreed modules of training.

An employee at this level performs work above and beyond the skills of an employee at Plumbing and mechanical services/Sprinkler fitting worker Level 1(d) and to the level of their training. The following indicative tasks which an employee at this level may perform are:

  • exercises good interpersonal communication skills;
  • exercises discretion within their level of training;
  • understands and applies quality control techniques;
  • performs work under general supervision either individually or in a team environment;
  • has knowledge of the 4 streams within the building and construction industry and how they inter-relate;
  • works in a safe manner;
  • having been given adequate written or verbal instruction, is able to control their own schedule of work and meet objectives with general supervision;
  • is capable of detailed measuring techniques;
  • interacts with and assists employees of other companies on-site or at the workplace; and
  • anticipates and plans for constant changes to the work environment.

The following indicative tasks which an employee at this level may perform are subject to the employee having completed the appropriate training to perform the particular task:

  • operating a laser when carrying out levelling;
  • read and interpret plans and specifications;
  • operate machinery and equipment requiring the exercise of skill and knowledge beyond that of an employee at Plumbing and mechanical services worker/Sprinkler fitting worker Level 1(d); and
  • assist with informal on-the-job guidance to other employees to a limited degree.

(f) Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1

A Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1 is an employee who holds a trade certificate or its equivalent in the Services Stream (Plumbing and mechanical services/Sprinkler fitting) and who is able to exercise the skill and knowledge of that trade.

A Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1 works above and beyond an employee at Plumbing and mechanical services worker/Sprinkler fitting worker Level 1(d) and to the level of their training. The following indicative tasks which an employee at this level may perform are:

  • exercises good interpersonal and communication skills;
  • reads, interprets and applies information from plans;
  • understands and applies quality control techniques;
  • exercises discretion within the scope of this grade;
  • performs work under general supervision either individually or in a team environment;
  • able to perform tasks safely and be able to identify hazards within their sphere of work;
  • assists with informal on-the-job guidance to a limited degree;
  • performs non-trade tasks incidental to their work;
  • has knowledge of the fields of work within the Plumbing and Mechanical Services sector of the Services Stream and how they relate to the other areas of the Services Stream; and
  • performs work which while primarily involving the skills of the employee’s trade is incidental or peripheral to the primary task and facilitates the completion of the whole task. Such incidental or peripheral work would not require additional formal technical training.

(g) Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 2

A Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 2 is a Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1 who has successfully completed 3 appropriate modules in addition to the training requirements of Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1, or equivalent; or will have equivalent skills gained through work experience subject to having successfully completed a skills test equivalent to the structured training requirements for this level.

A Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 2 works above and beyond a Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1 and to the level of their training. The following indicative tasks which an employee at this level may perform are:

  • exercises the skills attained through completion of the training prescribed for this classification;
  • works under general supervision either individually or in a team environment;
  • understands and implements quality control techniques;
  • provides trade guidance and assistance as part of a work team;
  • exercises discretion within the scope of this grade;
  • has knowledge of occupational, health and safety requirements subject to the level of their training; and
  • reads, interprets and applies information from plans.

The following indicative tasks which an employee at this level may perform are subject to the employee having the appropriate Trade and Post-Trade training to enable them to perform the particular tasks:

  • exercises skills involved in fabrication, assembly, installation, repair, maintenance, testing, modifying, fault finding, design or commissioning of systems such as water supply, sanitary, waste disposal and drainage, mechanical services including heating, ventilation and airconditioning, irrigation, roofing, gas fitting or gas consumer piping systems and fire sprinkler systems, foam systems, deluge systems, CO2 systems, pumps and pump control systems, hydrants, hose reels, combined systems or explosive suppression systems.

(h) Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson—special class Level 1

A Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson—class Level 1 is a Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1 who has completed the following training requirements:

(i) successfully completed 6 appropriate modules in addition to the training requirements of Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1, or equivalent; or

(ii) will have equivalent skills gained through work experience subject to having successfully completed a skills test equivalent to the structured training requirements for this level.

A Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson—special class Level 1 works above and beyond a Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 2 and to the level of their training. The following indicative tasks which an employee at this level may perform are:

  • exercises the skills attained through completion of the training prescribed for this classification;
  • understands and implements quality control techniques;
  • provides trade guidance and assistance as part of a team;
  • exercises discretion within the scope of this grade;
  • works under limited supervision either individually or in a team environment; and
  • reads, interprets and applies information from plans.

The following indicative tasks which an employee at this level may perform are subject to the employee having the appropriate Trade and Post-Trade training to enable the employee to perform the particular indicative tasks:

  • exercise precision trade skills using various materials and/or specialised techniques;
  • schedule and plan work activity;
  • write brief reports on work activity;
  • have knowledge of the Australian Standards applying to their sphere of work;
  • recognise hazards associated with tasks in their field of work; and
  • exercises skills involved in the fabrication, assembly, installation, repair, maintenance, testing, modifying, fault finding, design or commissioning of systems such as water supply, sanitary, waste disposal and drainage, mechanical services including heating, ventilation and airconditioning, irrigation, roofing, gas fitting or gas consumer piping systems and fire sprinkler systems, foam systems, deluge systems, CO2 systems, pumps and pump control systems, hydrants, hose reels, combined systems or explosive suppression systems.

(i) Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson—special class Level 2

A Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson—special class Level 2 is a Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1 who has completed the following training requirements:

(i) successfully completed 9 appropriate modules in addition to the requirements of Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1, or equivalent; or

(ii) will have equivalent skills gained through work experience subject to having successfully completed a skills test equivalent to the structured training requirements for this level.

A Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson—special class Level 2 works above and beyond a Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson—special class Level 1 and to the level of their training. The following indicative tasks which an employee at this level may perform are:

  • exercises the skills attained through completion of the training prescribed for this classification;
  • provides trade guidance and assistance as part of a work team;
  • understands and implements quality control techniques;
  • works under limited supervision either individually or in a team environment; and
  • reads, interprets and applies information from plans.

The following indicative tasks which an employee at this level may perform are subject to the employee having the appropriate Trade and Post Trade training to enable the employee to perform the particular indicative tasks:

  • exercises high precision trade skills using various materials and/or specialised techniques; and
  • exercises skills involved in the fabrication, assembly, installation, repair, maintenance, testing, modifying, fault finding, design or commissioning of systems such as water supply, sanitary, waste disposal and drainage, mechanical services including heating, ventilation and airconditioning, irrigation, roofing, gas fitting or gas consumer piping systems and fire sprinkler systems, foam systems, deluge systems, CO2 systems, pumps and pump control systems, hydrants, hose reels, combined systems or explosive suppression systems.

(j) Advanced plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1

An Advanced plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1 is a Plumbing and mechanical services tradesperson/ Sprinkler fitter tradesperson Level 1 who has completed the following training requirements:

(i) successfully completed 10.5 appropriate modules in addition to the training requirements of Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1;

(ii) equivalent accredited training, or equivalent; or

(iii) will have equivalent skills gained through work experience subject to having successfully completed a skills test equivalent to the structured training requirements for this level.

An Advanced Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1 works above and beyond a Plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson—special class Level 2 and to the level of their training. The following indicative tasks which an employee at this level may perform are:

  • exercises the skills attained through completion of the training prescribed for this classification;
  • exercises discretion within their level of training;
  • is able to provide trade guidance and assistance as part of a work team;
  • understands and implements quality control techniques;
  • works under limited supervision either individually or in a team environment; and
  • reads, interprets and applies information from plans.

The following indicative tasks which an employee at this level may perform are subject to the employee having the appropriate Trade and Post-Trade training to enable the employee to perform the particular indicative tasks:

  • exercises high precision trade skills using various materials and/or specialised techniques;
  • possesses effective written and verbal skills in order to provide concise reporting and communication; and
  • exercises skills involved in the fabrication, assembly, installation, maintenance, testing, modifying, fault finding, design or commissioning of systems such as water supply, sanitary, waste disposal and drainage, mechanical services including heating, ventilation and airconditioning, irrigation, roofing, gas fitting or gas consumer piping systems and fire sprinkler systems, foam systems, deluge systems, CO2 systems, pumps and pump control systems, hydrants, hose reels, combined systems or explosive suppression systems.

(k) Advanced plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 2

An Advanced plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 2 is a Plumbing and mechanical services tradesperson/ Sprinkler fitter tradesperson Level 1 who has completed the following training requirements:

(i) successfully completed 12 appropriate modules in addition to the training requirements of Plumbing and mechanical services tradesperson/ Sprinkler fitter tradesperson Level 1;

(ii) equivalent accredited training, or equivalent; or

(iii) will have equivalent skills gained through work experience subject to having successfully completed a skills test equivalent to the structured training requirements for this level.

An Advanced plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 2 works above and beyond an Advanced plumbing and mechanical services tradesperson/Sprinkler fitter tradesperson Level 1 and to the level of their training. The following indicative tasks which an employee at this level may perform are:

  • undertakes quality control and work organisation at a level higher than for an Advanced plumbing and mechanical services tradesperson Level 1;
  • provides trade guidance and assistance as part of a work team;
  • assists in the provision of training to employees in conjunction with supervisors/trainers;
  • performs maintenance planning and predictive maintenance work within their field of work;
  • prepares reports of a technical nature on specific tasks or assignments as directed; and
  • exercises broad discretion within the scope of this level.

The following indicative tasks which an employee at this level may perform are subject to the employee having the appropriate Trade and Post-Trade Training to enable the employee to perform the particular indicative tasks:

  • use information from plans to identify, diagnose and solve problems related to work in a specific field;
  • be able to identify any deviations from plans and sketches;
  • schedule and plan work for a team and provide brief reports on the progress and quality of the work;
  • exercise skills involved in the fabrication, assembly, installation, maintenance, testing, modifying, fault finding, design or commissioning of systems such as water supply, sanitary, waste disposal and drainage, mechanical services including heating, ventilation and airconditioning, irrigation, roofing, gas fitting or consumer piping systems and fire sprinkler systems, foam systems, deluge systems, CO2 systems, pumps and pump control systems, hydrants, hose reels, combined systems or explosive suppression systems; and
  • exercise diagnostic skills in respect of various systems in plumbing and mechanical services.

Need help applying the Award to your business?

Our HR Advisory team is ready to help with advice and support. Whether you’re unsure about pay classifications, rostering rules or managing weekend penalties, our experts can walk you through the details and help you make confident, informed decisions.

We’re here to make sure you understand what the Award means for your team, without the legal jargon. 

And if you haven’t already, download your free copy of the Award guide. It’s an easy reference to keep on hand whenever you need a clear answer.

Register for the award

Related Resources